how to load glock 19

How To Load Glock 19 - I still remember the GLOCK pistol I saw. In the year In 1987 or 1988 I went to the drug store to buy a Colt at Long's Drug Store in Colorado Springs and saw a Glock 17 - the only model made at the time. I fell in love with it at the time and walked out of the drug store in exchange for a 1911 Colt. I remember the feel of the GLOCK 17 in my hand and then carrying two 17 round magazines with the gun. Back then, no one would give you a second magazine in a gun. I also remember wondering about the material the frame was made of, and the clerk behind the counter could only tell you "plastic". However, I bought it anyway.

Since I first purchased the GLOCK 17, I've probably gotten every model except the GLOCK 18, which is because the 18 is limited to the law enforcement and military trade. However, I did have a chance to fire the GLOCK 18, and it was a blast – literally! From Col. I'm Rex Applegate, in the first video produced by Paladin Press, and we had a GLOCK 23 prototype to play with. It worked most of the time - with an unmodified GLOCK 19 magazine, and rounds didn't always feed well.

How To Load Glock 19

The pistol we're talking about today is the GLOCK 19 Gen 4 9mm, and it's probably the best generation to date. It comes with 4 waists, two to make the addition thicker or bigger, and two to lengthen the tang slightly. Some people who wear gloves experience breaks when their hands hit their hands, so you won't have that problem with a back strap. (I've never had a problem wearing gloves and shooting a GLOCK.)

Glock 19x Gen5 9mm Handgun With Night Sights

The GLOCK 19, Gen 4 weighs 23.65 ounces, and has a 4.02-inch barrel, with a trigger pull of about 5.5 pounds. Each magazine (you get three) holds 15 9mm rounds. The barrel is hexagonal because it has not been fired.

The trigger is what GLOCK calls a safe action trigger - there's a little regulator in the middle of the trigger, and you can't fire the gun without your finger on the trigger. There are also a number of built-in safeguards, but nothing you need to do. The sight has a white dot polymer on the front and the rear is polymer except for the "U" shape and is very quick to pick up. Most of these sights are not suitable for target shooting, but most people who buy a GLOCK do so for self-defense or work purposes, not for practice. If you want to put a different sight on the gun, the sight is easy to change. But you need a GLOCK front sight kit to replace the front sight.

I've been told that the GLOCK 19 is the most popular model in the GLOCK lineup, and I don't see the point there. The GLOCK 19 is smaller than the full-size Model 17 and larger than the sub-compact Model 26 - "just right," according to Goldlocks. 19 is definitely my favorite GLOCK model. My husband and I carry GLOCK 19's; They are concealed weapons permit holders. The polymer frame has a toe on the front strap, and the sides and back have small "nubs" to ensure the gun stays secure no matter the weather.

The spring setting is slightly looser on the Gen 4 19 model than the previous generation. And, you can shoot +P and +P+ 9mm in 19 with no problem. The slide has a corrosion-resistant tenifer coating; I said the cover is harder than a diamond. And, even if the black is gone, the cover is still there and the slide is not distorted. And, as mentioned, the frame is polymer.

What's The Difference Between Glock 17, Glock 19, & Glock 26

In addition, the thief has a slight increase - when there is a round in the room, you can see or feel the slight increase of the thief.

All GLOCKs are disassembled for easy cleaning and maintenance. Simply remove the magazine, check the chamber to make sure there are no rounds in the barrel, then point the rifle in a safe direction and pull the trigger. After doing this, move the slide back about 1/4 inch while pressing the takedown lever, and then the slide will disengage. Then you can remove the spring and barrel assembly, and that's it. Put the barrel back into the slide, then the recovery spring assembly and back into the frame - it's that easy!

All GLOCKs come with magazine loaders, and the mags are a bit awkward to carry. I don't have a problem but a lot of people do. Use a mag loader to load magazines and let them sit for a week or two, and the next time you go to load the magazines, you will have a spring assembly so they will be easier to load.

GLOCK rifles don't need much oil. However, I make sure my Model 19 is lubricated at all times, with Italian Gun Grease http://www.italiangungrease.com/ and it is the best gun grease I have ever used. I also like Blackhawk products http://www.blackhawk.com/ SERPA hip holster for concealed carry, and the tactical hip holster makes a great duty one - low and snug.

Magazine Sleeve/spacer/adapter Glock G26/g27 With Glock G19/g23 Magazine

While testing my GLOCK 19, Gen 4, I had a good variety of ammo from Black Hills Ammunition and Buffalo Bore ammo, including regular velocity, +P and +P+ loads, and in the 19. I've never had a problem with it.

I had a 100-gr round from Black Hills, which is mainly used for domestic rifles. When the round hit the iron rod, it was completely destroyed. I also had a Black Hills 115 gr FMJ round. I'm waiting for some Black Hills 115-gr + P Barnes all-copper blank TAC-XP loads; When I asked them, they left. From Buffalo Bore, I had a 15-gr Barnes hollow point TAC-XP+P+P load, a 124-gr FMJ FN +P+, a 124-gr JHP +P, a 115-gr JHP +P+, and a 147-gr. JHP + P+ items.

All the real testing was about 25 feet from the sleeping bag rolled up on the hood of my SUV. As mentioned earlier, I had no crashes. I could feel the difference on the +P+ rounds from the Buffalo Bore; they shouted. The GLOCK line of rifles is not known for earth-shattering shooting accuracy. If I do my part, I usually get groups around 4 inches. With less trigger pull and combat style sights it's as good as I can get with most GLOCKs. But most experts agree that 4-inches at 25-yards is sufficient for self-defense needs.

I live in the Boones, and am always on the trail (or in the Boones) and carry a 9mm with a Buffalo Bore 124-gr “Penetrator. ” FMJ FN +P+ rounds if I am in black bear country. It goes deep to prevent bears from eating lunch. I take a lot of loads on the road, but I've been spoiled with 115-gr Barnes hollow point TAC XP + P loads with Black Hills or Buffalo Bore; Barnes bullets penetrate deep, expand and stay together.

Glock 19 (g19) Compact 9mm Combat/tactical Pistol: How And Why Us Army Special Forces (sf) Adopted It…a Little History

Also note that the GLOCK 19 takes a GLOCK 17 magazine in a short amount of time, even though it is extended in the rear of the gun. Also makes a GLOCK extended 33rd magazine. I have used them and they work. I've used aftermarket Korean 33rd magazines though, and had no problems with them. These knockoffs are usually less than half the price of a genuine GLOCK 33-rd 9mm magazine.

On the other hand, the Korean-made 31-rd .40 S&W magazine I tested was not very reliable. If I have to grab and run, as a spare, I carry my GLOCK 19, 15 round magazine, as well as a Blackhawk Productions 9mm machine gun case, 3 in 33rd magazine inside – with AR. -15 or AK-47, of course.

Many first-time gun buyers purchase a GLOCK model because they see many police officers carrying GLOCKs. And gun dealers often recommend the GLOCK. Many students in my gun class who come to my non-gun class borrow my GLOCK 19 and immediately go out and buy one for themselves. United Nations security forces are also involved

Glock 19 gen 4 where to buy, how to operate glock 19, how to load a glock 19 gen 4, how to clean glock 19, how to break down a glock 19, glock 19 where to buy, how to shoot glock 19, how to use glock 19, how to load glock, how much is glock 19, how to disassemble a glock 19, glock 19 how many rounds